转:http://bbs.ickey.cn/group-topic-id-57570.html

http://www.cnblogs.com/qinyg/p/3355707.html

motion 简介：

          它是一个开源的linux下的 视频监控软件，主要功能有：

              1.web远程监控

              2.动作探测报警，当有人或物体进入摄像区域，则启动触发脚本，如发送邮件短信之类的通知客户

              4.可以录像保存证据

              5.开源地址  http://www.lavrsen.dk/foswiki/bin/view/Motion）

先去下载源代码：https://github.com/sackmotion/motion

1.下载motion 源码

orangepi@orangepi:~/app/motion/motion$ git clone https://github.com/sackmotion/motion.git

2.下载FFmpeg库 

git clone https://github.com/dwbuiten/FFmpeg.git

3.安装必要的库，否则编译可能会出错

sudo apt-get install libv4l-dev

sudo apt-get install zlib1g-dev

4.开始编译

进入 FFmpeg

编译：

./configure
make
sudo make install

进入motion

同上

./configure
make
sudo make install

直接输入 motion 启动

#motion

orangepi@orangepi:~/app/motion/motion$ motion
[0] [ALR] [ALL] conf_load: could not open configfile /usr/local/etc/motion.conf: 
[0] [CRT] [ALL] conf_load: Not config file to process using default values
[0] [NTC] [ALL] motion_startup: Using default log level (NTC) (6)
[0] [NTC] [ALL] motion_startup: Motion Git-28b7cb2a4297c78b9c08c9ce29a648aeb22120d0 Started
[0] [NTC] [ALL] motion_startup: Logging to syslog
[0] [NTC] [ALL] motion_startup: Using default log type (ALL)
[0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
[0] [NTC] [ENC] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3609190 LIBAVFORMAT_BUILD 3607397
[0] [NTC] [ALL] main: Thread 1 is device: /dev/video0 input -1
[0] [NTC] [ALL] main: Stream port 0
[0] [NTC] [ALL] main: Waiting for threads to finish, pid: 17400
[1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input -1
[1] [ALR] [VID] vid_v4lx_start: Failed to open video device /dev/video0: 
[1] [WRN] [ALL] motion_init: Could not fetch initial image from camera Motion continues using width and height from config file(s)
[1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1 items
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input -1
[1] [ALR] [VID] vid_v4lx_start: Failed to open video device /dev/video0: 
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input -1
[1] [ALR] [VID] vid_v4lx_start: Failed to open video device /dev/video0:

发现提示 在/usr/local/etc/motion.conf缺少配置文件，那我们就配置下。

orangepi@orangepi:~/app/motion/motion$ ls *.conf
motion-dist.conf  thread1.conf  thread2.conf  thread3.conf  thread4.conf

发现

motion-dist.conf 

配置文件，打开修改之~~~

欲看详情，请看下回分解。。。

如有问题，可以QQ搜索群1028468525加入群聊，欢迎一起研究技术

有疑问联系站长，请联系QQ：